Control your electrical items via your phone whenever and wherever you are using our Eclipse Home app. Automate your home easily by installing multiple ECL-SM330 Smart Wi-Fi plugs. Simply plug in the ECL-SM330 into an electrical outlet, connect a device to the Smart Plug, and wirelessly control your device using a tablet or phone with our Eclipse Home app. A secured 2.4GHz WiFi network is required.
We offer free technical support and 1 year manufacturerâ€™s warranty.
The Megapixall Home app provides remote access, you can easily check the real-time status of your device anytime, anywhere. Turn On/Off the connected devices wherever you are, thermostats, lamps, water heater, coffee makers, fans, switches and other devices before arriving home or after leaving.
You can use the free Megapixall Home app to create schedules / Timer / Countdown for connected electronics based on your time routines.
Scheduling also helps lower your electricity bill by keeping power-hungry devices off when they are not needed.
Share Megapixall Smart plug controls with your family by using the share function in the Megapixall Smart Home app. Give family members control of all your Home Automation devices and allow them to set their own schedules and timers based on their needs.
Megapixall Smart Plug works with exsisting 2.4Ghz Wi-Fi networks and does not require an additional hub for it to work. It simply works with Wi-Fi, making it easy to install and program.
The ECL-SM330 works seamlessly with Amazon Alexa and Google Home products to give you hands-free voice control over your lights and devices. Pair the ECL-SM330 Wi-Fi Smart plug with Alexa or Google to switch your lights on and off with just the power of your voice.
2.4 GHz ~ 2.4835 GHz IEEE802.11b/g/n
Working temperature and humidity
-10 C ~40 C, humidity less than 95% (no condensation).
ECL-SM310 Wi-Fi Repeater Manual
If this is your first Megapixall Home product, you will be asked to set up an account.
To set up an account:
If you already have another Megapixall Home device installed, simply open the Megapixall Home app.
Use your email or phone number to register a new account with us. Choose the country code that corresponds to your location.
You will receive an email or text message with a code to verify your account.
Tap the + Sign on the top right hand corner, then select Socket Wi-Fi.
Plug in the the smart plug and make sure the LED is flashing then click on next step.
Confirm or add your home Wi-Fi network and enter the password for your home Wi-Fi network and select confirm.
The application will now begin searching for the plug and show you a percentage countdown.
Once the app finds the new smart plug it will show 100% and say device found.
The app will then program the plug Wi-Fi settings and marry the two devices to your account.
Give your plug a simple name that you can latter reference and add it to a room group. Press Done when complete.
The plug will now show you the controls and you are ready to use the plug and app.